InstantForum.NET v4.1.1A1VBCode Forumshttp://www.a1vbcode.com/vbforums/forums@a1vbcode.comSat, 25 May 2013 15:41:21 GMT20http://www.a1vbcode.com/vbforums/Topic25640-13-1.aspxWelcome to A1vbcode Stephen.</P><P>This isn't the best forum for computer problems I would recommend <a href="http://www.bleepingcomputer.com/forums/" target="_blank" class="SmlLinks">Bleeping Computer</a>, join and post your question in the correct forum. <img align="absmiddle" src="http://www.a1vbcode.com/vbforums/Skins/Classic/Images/EmotIcons/Wink.gif" border="0" title="Wink">Thu, 04 Sep 2008 07:13:17 GMTKeithukhttp://www.a1vbcode.com/vbforums/Topic25640-13-1.aspxI have an old K7VZA mobo and today after clearing the cmos by using JP1 jumper the computer won't boot and i get 4 long beeps and then it shuts down automatically.<BR>I have tried the following:<BR>- set the jumper used to clear the bios multiple times in [CLEAR CMOS] position and then back to [NORMAL] position;<BR>- removed any PCI cards, HDD, Floppy Disk Drive and left only the cpu, the agp card and one stick of ram;<BR>- the cpu fan is connected properly to CPUFAN1 power connector and is working;<BR>- i have removed the battery on the mobo and kept it out for a few minutes;<BR>- the bios write protect jumper is set to short pins 1 - 2 which means [DISABLED].<BR>Still no luck.<BR>The bios was flashed some years ago when i have installed an amd athlon cpu and anything went ok.<BR>As i said anything worked good today until i have removed the creative sound blaster pci card and cleared the cmos settings so the onboard sound will be enabled again.<BR>I would really apreciate any help. Thank you.<BR></P><P>--------------------------------------Thu, 04 Sep 2008 00:58:07 GMTstephenjohnson